The PIM International archive

The PIM International magazine archive gives free digital access to past issues dating back to 2012.

More than 2,000 pages of exclusive content offers unparalleled insight into the world of Metal Injection Molding and Ceramic Injection Molding, including a large number of articles that are of direct interest to those from the world of sinter-based metal Additive Manufacturing.

These include:

Reports on visits to leading Metal Injection Moulding and Ceramic Injection Moulding producers
Articles on materials and technology trends
Technical reports from leading international conferences
Industry news and analysis

Browse our PDF archive by year

The following years of Powder Injection Moulding International magazine are available to download in PDF format, free of charge, from our archive.

2021 | 2020 | 2019 | 2018

2017 | 2016 | 2015 | 2014

2013 | 2012 | 2011 | 2010

Magazines not currently available in the archive

The following years of Powder Injection Moulding International magazine are not yet available to download in PDF format. Information is provided on the contents of each issue, along with abstracts where available.

2009 | 2008 | 2007

Industry News

Wall Colmonoy completes installation of UK-first Desktop Metal Shop System
Wall Colmonoy Limited, Pontardawe, Wales, UK, reports it has fully installed a Desktop Metal™ Shop System™, adding to the range of metal processing technologies offered through its Precision Components business»
Online Q&A directory launched for vacuum furnace end-users
VacuumFurnaces.com, a mobile and online Question-and-Answer directory, has been launched for vacuum furnace equipment end-users; commercial and in-house vacuum heat treaters; and equipment, product»
Multistation becomes a distributor of Xerion’s Fusion Factory
Multistation, a digital manufacturing provider based in France, has signed an agreement to be the exclusive distributor for Xerion’s Fusion Factory Additive Manufacturing system in France and North Africa»
Ultra Fine Specialty Products earns AS9100 certification for gas atomised powders
Ultra Fine Specialty Products, LLC, an affiliate of Novamet Specialty Products Corporation, has announced that its manufacturing site in Woonsocket, Rhode Island, USA, has received AS9100 certification»
ITA calls for abstracts for Titanium USA 2021
The organising committee for the Titanium USA 2021 virtual conference, taking place October 5, has issued a Call for Abstracts. Both market-oriented and technical papers are being sought, with abstracts encouraged»
Tekna begins trading on Euronext Growth Oslo
Tekna Holding AS, Sherbrooke, Quebec, Canada, has begun trading on Euronext Growth Oslo, a multilateral trading facility operated by the Oslo Stock Exchange. The shares in the new issue were sold at NOK 27»
Headmade Materials enables high-end titanium pedals for bikes
Headmade Materials GmbH, Würzberg, Germany, has collaborated with Titanum GmbH, Hamburg, to produce lightweight titanium clipless bike pedals. Through the use of Headmade Materials' Cold Metal Fusion»
Fraunhofer IFAM installs Tritone's MoldJet AM system, Europe's first
The Fraunhofer Institute for Manufacturing Technology and Advanced Materials (IFAM), Dresden, Germany, is expanding its range of sinter-based Additive Manufacturing technologies with a new MoldJet»

View all news

Read the latest issue of PIM International

The latest issue of PIM International magazine is available to view online or download in PDF format.

As well as an extensive MIM, CIM industry and sinter-based AM industry news section, this 124-page issue includes the following exclusive articles and reports:

Bosch Advanced Ceramics: Driving ceramic Additive Manufacturing for series production with Lithoz
High precision, flexibility and intensive customer support: How Demcon MIM is planning ahead for long-term growth
Playing the long game: The story of Binder Jetting, and ExOne’s view on a rapidly evolving technology landscape
Riding the storm: A review of progress in China and Taiwan’s MIM industry during 2020
Advanced Powder Injection Moulding process developments presented at Euro PM2020

> Go to magazine page

Industry News

Wall Colmonoy completes installation of UK-first Desktop Metal Shop System
Wall Colmonoy Limited, Pontardawe, Wales, UK, reports it has fully installed a Desktop Metal™ Shop System™, adding to the range of metal processing technologies offered through its Pr...»
Online Q&A directory launched for vacuum furnace end-users
VacuumFurnaces.com, a mobile and online Question-and-Answer directory, has been launched for vacuum furnace equipment end-users; commercial and in-house vacuum heat treaters; and equipment, product»
Multistation becomes a distributor of Xerion’s Fusion Factory
Multistation, a digital manufacturing provider based in France, has signed an agreement to be the exclusive distributor for Xerion’s Fusion Factory Additive Manufacturing system in France and Nor...»
Ultra Fine Specialty Products earns AS9100 certification for gas atomised powders
Ultra Fine Specialty Products, LLC, an affiliate of Novamet Specialty Products Corporation, has announced that its manufacturing site in Woonsocket, Rhode Island, USA, has received AS9100 certifica...»
ITA calls for abstracts for Titanium USA 2021
The organising committee for the Titanium USA 2021 virtual conference, taking place October 5, has issued a Call for Abstracts. Both market-oriented and technical papers are being sought, with abst...»
Tekna begins trading on Euronext Growth Oslo
Tekna Holding AS, Sherbrooke, Quebec, Canada, has begun trading on Euronext Growth Oslo, a multilateral trading facility operated by the Oslo Stock Exchange. The shares in the new issue were sold a...»
Headmade Materials enables high-end titanium pedals for bikes
Headmade Materials GmbH, Würzberg, Germany, has collaborated with Titanum GmbH, Hamburg, to produce lightweight titanium clipless bike pedals. Through the use of Headmade Materials' Cold Metal Fus...»
Fraunhofer IFAM installs Tritone's MoldJet AM system, Europe's first
The Fraunhofer Institute for Manufacturing Technology and Advanced Materials (IFAM), Dresden, Germany, is expanding its range of sinter-based Additive Manufacturing technologies with a new MoldJet»
Holo introduces PureForm technology for metal Additive Manufacturing
Holo, a volume production Additive Manufacturing company based in Newark, California, USA, has launched its PureForm™ metal AM platform, ramping up production capacity to manufacture thousan...»

View all industry news

Powder Injection Moulding International

The magazine for Metal and Ceramic Injection Moulding

The PIM International archive

Browse our PDF archive by year

2021 | 2020 | 2019 | 2018

2017 | 2016 | 2015 | 2014

2013 | 2012 | 2011 | 2010

Magazines not currently available in the archive

2009 | 2008 | 2007

Industry News

Wall Colmonoy completes installation of UK-first Desktop Metal Shop System

Online Q&A directory launched for vacuum furnace end-users

Multistation becomes a distributor of Xerion’s Fusion Factory

Ultra Fine Specialty Products earns AS9100 certification for gas atomised powders

ITA calls for abstracts for Titanium USA 2021

Tekna begins trading on Euronext Growth Oslo

Headmade Materials enables high-end titanium pedals for bikes

Fraunhofer IFAM installs Tritone's MoldJet AM system, Europe's first

Read the latest issue of PIM International

E-newsletter

Upcoming events

Industry News

Wall Colmonoy completes installation of UK-first Desktop Metal Shop System

Online Q&A directory launched for vacuum furnace end-users

Multistation becomes a distributor of Xerion’s Fusion Factory

Ultra Fine Specialty Products earns AS9100 certification for gas atomised powders

ITA calls for abstracts for Titanium USA 2021

Tekna begins trading on Euronext Growth Oslo

Headmade Materials enables high-end titanium pedals for bikes

Fraunhofer IFAM installs Tritone's MoldJet AM system, Europe's first

Holo introduces PureForm technology for metal Additive Manufacturing