PIM International magazine archive 2011

The Powder Injection Moulding International magazine archive for 2011 gives free access to our most recent issues, offering the most comprehensive insight into the world of Metal Injection Moulding and Ceramic Injection Moulding. All issues can be downloaded free of charge as PDF files.

 

 

Vol. 5 No. 4 December 2011

  • A review of the current status of MicroPIM: Part 2, Screw injection units, simulation and process variants
  • ITB Precisietechniek: Metal Injection Moulded titanium drives growth at Dutch producer
  • MIM at Euro PM2011: The competition between Metal Injection Moulding and investment casting
  • MIM at Euro PM2011: Metal Injection Moulding of applied functional materials
  • MIM at Euro PM2011: Biomedical applications
  • Raymor AP&C: Leading the way with plasma atomised titanium spherical powders for Metal Injection Moulding
  • Micro-PIM of Barium Titanate
  • The effect of backbone polymer on phase transformation temperatures and pseudo-elasticity of MIM NiTi alloy using a water soluble binder system
  • MIM of W-10%Cu material with ultra fine composite powder

> More information


 

 

Vol. 5 No. 3 September 2011

  • A review of the current status of MicroPIM: Materials, processing, microspecific considerations and applications
  • Indo-MIM: The world’s largest capacity Metal Injection Moulding producer sees no limits to the industry’s expansion
  • MIM at PowderMet 2011: Advances in the metal injection moulding of titanium
  • MIM at PowderMet 2011: Advances in ferrous material grades for MIM applications
  • Metal Injection Moulding of Inconel 713C for turbocharger applications
  • Sandvik Osprey: Expanding fine powder production to meet customer demand
  • Improving MIM part quality through enhanced sintering atmosphere control
  • An approach to cost effective low alloyed materials for Metal Injection Molding
  • Bulk Metallic Glasses (BMG): A competing or complementary technology to MIM?

> More information


 

 

Vol. 5 No. 2 June 2011

  • MIM in Taiwan: Electronics sector continues to support rapid industry growth
  • Company Visit – FloMet: A North American MIM pioneer continues to expand the possibilities of MIM technology
  • MIM2011 Conference Review: Industry remains confident as markets and regions continue to evolve
  • LÖMI, a leading manufacturer of solvent debinding furnaces, celebrates its 20th anniversary and doubles production capacity
  • Contribution to the development of 18 carat gold alloy shaped by MIM
  • Mixing titanium MIM feedstock: Homogeneity, debinding and handling strength
  • 3D visualisation of flow patterns in injection moulded ceramic green parts

> More information


 

 

Vol. 5 No. 1 March 2011

  • PIM in the Aerospace industry: Opportunities and challenges
  • Automation and a focus on value-added services helps Metal Injection Moulding thrive at OBE
  • Carpenter Powder Products: Stepping up the production of gas atomised powder for the MIM industry
  • Investigations into water soluble binder systems for Powder Injection Moulding
  • A new approach to monitoring process temperatures during sintering
  • Effect of a slight addition of Zr on the sintering behaviour of water-atomised 316L stainless steel powder
  • Progress of Two-Component Micro Powder Injection Moulding (2C- MicroPIM)

> More information

 

Browse our PDF archive by year

The following years of Powder Injection Moulding International magazine are available to download in PDF format, free of charge, from our archive.

2017 | 2016 | 2015 | 2014

2013 | 2012 | 2011 | 2010

2009 | 2008 | 2007

Industry News

Read the latest issue of PIM International

The latest issue of PIM International magazine is available to view online or download in PDF format.

As well as an extensive MIM and CIM industry news section, this 104-page issue includes the following exclusive articles and reports:

  • Threat or opportunity? The MIM industry as a partner, a target and a market for metal AM
  • WORLDPM2018 Congress: Global MIM markets show healthy growth
  • Ceramic Injection Moulding and Ceramic Additive Manufacturing side by side: Opportunities and challenges
  • Euro PM2018: Innovations in Metal Injection Moulding highlighted in Bilbao
  • > Go to magazine page

Connect with us

E-newsletter

Register for our e-newsletter and we'll let you know each time a new issue of PIM International magazine is available, as well as keeping you informed of MIM and CIM industry developments.

Industry News