July 2, 2007
PIM International is delighted to confirm that it will be a sponsor at the European Powder Metallurgy Association’s Euro PM2007 Conference and Exhibition, Toulouse, France, 15-17 October 2007. Paul Whittaker, Publishing Director of PIM Internati ... Read more »
July 1, 2007
MIM components are to go into series production for the EJ200 engine used in the Eurofighter aircraft following successful testing in rigs and engines. MIM is said to have the potential for substantial cost reductions in aero engine applications. Modern a ... Read more »
July 1, 2007
Both dental professionals and patients are asking for completely metal-free dental restorations in an effort to eliminate potential allergies to metal. Nobel Biocare of Switzerland has with its Procera® process been at the forefront of the development of ... Read more »
July 1, 2007
Sumitomo Osaka Cement (SOC) has been producing MIM parts at its Funabashi (Chiba Pref.) site since 1987 with several expansions in capacity since that time. According to a SOC technical report from the Metal Injection Team of the Advanced Materials Resear ... Read more »
July 1, 2007
The injection moulding machine manufacturer Battenfeld, of Kottingbrunn, Austria, which was sold by the SMS group to venture capitalists last year, has reported full order books and significantly increased sales for the first quarter of 2007. The c ... Read more »
June 1, 2007
Remington Arms Co., USA, has announced that it will be acquired by an affiliate of Cerberus Capital Management, L.P. as part of a definitive agreement between Cerberus and RACI Holding, Inc. for an estimated value of $370 million. Tommy Millner, CEO of Re ... Read more »
June 1, 2007
The official ground-breaking ceremony for the new Arburg Customer Centre in Lossburg, Germany, took place in on 28 March 2007. The new building will be a large show room with sufficient space to house the entire series of Arburg machines for injection mou ... Read more »
March 2, 2007
The growing acceptance of MIM as a maturing manufacturing technology is reflected in increasing demand for MIM powders. Sandvik Osprey Ltd, a leading supplier of gas atomised powders for MIM worldwide, has supplied the industry over 15 years with fine MIM ... Read more »
March 2, 2007
There has been a new addition to the powder technology scene in Austria. The Powder Technology Center at Austrian Research Centers GmbH in Seibersdorf has been founded with the aim of focusing research activities on powder injection moulding as well as co ... Read more »
March 2, 2007
Vertu, a manufacturer of handcrafted mobile phones for the luxury market, has used MIM technology in its Indianapolis Limited Edition Vertu Ascent phone as part of its Vertu Racetrack Legends Series.Made in the UK, the Indianapolis Limited Edition phone i ... Read more »
March 1, 2007
BMW’s patented Valvetronic variable valve lift, which has already enhanced the performance and fuel efficiency of BMW’s V-8 and V-12 engines, has also been introduced into its 6-cylinder engines. The 6-cylinder versions include a metal injection mould ... Read more »
March 1, 2007
The Caisse de dépôt et placement du Québec has invested $2 million in Maetta Sciences Inc. to assist with the deployment of its PIM technology for the industrial sectors, including aeronautics and medical products. ... Read more »
March 1, 2007
The European Powder Metallurgy Association (EPMA) has appointed Dr Olivier Coube (pictured) as its next Technical Director. Dr Coube, a French national aged 37, was previously employed by Plansee AG in Austria and the Fraunhofer Institute IWM in Freibur ... Read more »
| Download PDF |
Extensive MIM, CIM industry and sinter-based AM industry news, plus the following exclusive deep-dive articles and reports:
Join our community