EPMA hosts successful AM webinar
The European Powder Metallurgy Association (EPMA) and EuroAM sectoral group recently held the first in a series of free Powder Metallurgy webinars for 2020, focused on Additive Manufacturing ... Read more »
Metal Injection Molding | CIM | sinter-based AM event news
Call for papers issued for AMPM2021
The programme committee for the Additive Manufacturing with Powder Metallurgy Conference (AMPM2021) scheduled to take place at the Walt Disney World Swan and Dolphin, in Orlando, Florida, USA ... Read more »
Call for papers issued for PowderMet2021
The programme committee for the International Conference on Powder Metallurgy & Particulate Materials (PowderMet2021), scheduled to take place at the Walt Disney World Swan and Dolphin, in Orlando, Florida ... Read more »
Dates confirmed for AM Forum Berlin 2021
The 5th Additive Manufacturing Forum Berlin will take place at the Estrel Congress & Messe Center, Berlin, Germany, from March 11–12, 2021. Organised by Germany’s Institute for Production Management ... Read more »
EPHJ Trade Show on high-precision manufacturing to take place in September
The organisers of the EPHJ-EPMT-SMT Trade Show (EPHJ) for the high-precision industry have confirmed that the event, which was originally scheduled to run from June 16–19 but was postponed ... Read more »
HyGear to host webinar on ‘Economical recovery of waste hydrogen and nitrogen gas mixtures’ in July
HyGear, a supplier of industrial gases through on-site generation, headquartered in Arnhem, the Netherlands, will host a webinar on ‘Economical recovery of waste hydrogen and nitrogen gas mixtures’ ... Read more »
Programme released for Fraunhofer’s Virtual DDMC 2020
he Fraunhofer Additive Manufacturing Alliance, Dresden, Germany, has released the programme for its Virtual Direct Digital Manufacturing Conference (DDMC 2020), which will take place on June 23 ... Read more »
Rosmould and Rosplast rescheduled for June 2021
The 15th International Exhibition for Mould and Tool Making, Product Development and Contract Manufacturing (Rosmould) and the 11th International Exhibition of Machinery and Materials ... Read more »
MPIF to run a virtual Basic PM Short Course
The Metal Powder Industries Federation (MPIF)’s Basic PM Short Course 2020, originally scheduled to take place at the Penn Stater Conference Center Hotel in State College, Pennsylvania, USA ... Read more »
CECIMO to hold webinar on rapid deployment of Additive Manufacturing in EU
CECIMO, the European Association of Machine Tool Industry and Related Manufacturing Technologies, will hold a webinar titled ‘Additive Manufacturing: An opportunity to fill the gaps in traditional ... Read more »
In the latest issue of PIM International…
| Download PDF |
Extensive MIM, CIM industry and sinter-based AM industry news, plus the following exclusive deep-dive articles and reports:
- Metal Injection Moulding in Asia: Scale, supply chains, and growing overlap with metal Additive Manufacturing
- Chanel’s J12: How Ceramic Injection Moulding became part of the luxury narrative
- Ceramic AM enables 500 mm dual-channel gas distribution ring for high-speed PEALD and ALE in the same chamber
- From hypersonics to EVs: Sintering non-oxide ceramics for next-generation technologies
- ColdMetalFusion: A new approach to metal Additive Manufacturing
Buyer’s Guide: feedstock, powder, production technology and MIM, CIM and AM parts
Join our community