Magazine archive: Your deep-dive into MIM, CIM and sinter-based AM
The PIM International magazine archive gives free access to past issues dating back to 2010.
More than 3,000 pages of exclusive content offers unparalleled insight into the world of Metal Injection Molding, Ceramic Injection Molding and sinter-based metal Additive Manufacturing.
Browse archive by year
The following years of Powder Injection Moulding International magazine are available to download in PDF format, free of charge, from our archive.
2026 | 2025 | 2024 | 2023 | 2022 | 2021 | 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010
Recent additions…
Vol. 20 No. 2 Summer 2026
- Metal Injection Moulding in Asia: Scale, supply chains, and growing overlap with metal Additive Manufacturing
- Chanel’s J12: How Ceramic Injection Moulding became part of the luxury narrative
- Ceramic AM enables 500 mm dual-channel gas distribution ring for high-speed PEALD and ALE in the same chamber
- From hypersonics to EVs: Sintering non-oxide ceramics for next-generation technologies
- ColdMetalFusion: A new approach to metal Additive Manufacturing
> More information and free download
Vol. 20 No. 1 Spring 2026
- Industrialising titanium: MTIG’s strategy for scalable, cost-competitive precision MIM and AM
- Cooling the limits of power electronics: An integrated approach for e-mobility and AI hardware with copper MIM
- Removing the bottleneck: Automating depowdering for scalable Binder Jetting
- Extending the limits of Ceramic Injection Moulding: Thick-section processing with water-extractable binder
- Sinter-based Additive Manufacturing technologies in focus at ASTM’s ICAM 2025 conference
> More information and free download
Vol. 19 No. 4 Winter 2025
- Element 22: Mastering titanium component production with Metal Injection Moulding and Additive Manufacturing
- Advancing industrialisation: Binder Jetting at the forefront of a maturing sinter-based AM landscape
- Tailored feedstocks for MIM, CIM and sinter-based AM: How Blesol Tech is responding to market requirements
- Cleaner semiconductor etching: Bosch Advanced Ceramics’ two-part AM injector produced with Lithoz technology
> More information and free download
Vol. 19 No. 3 Autumn 2025
- Ceramic precision meets analogue performance: How Additive Manufacturing enables design freedom in high-end audio
- MPIF’s PM Design Excellence Awards 2025: Celebrating innovation in Metal Injection Moulding
- Sinter-based AM & MIM at the 21st Plansee Seminar: Cemented carbide and tungsten heavy alloy developments
- Atomik AM and the binder revolution: Rethinking the future of Binder Jetting
- Advances in water-debindable feedstock for Ceramic Injection Moulding: Thicker parts, faster cycles
- Comparative study of 17-4 PH spur gears produced by Metal Injection Moulding and Binder Jetting
> More information and free download
Browse by year
The following years of Powder Injection Moulding International magazine are available to download in PDF format, free of charge, from our archive.
2026 | 2025 | 2024 | 2023 | 2022 | 2021 | 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010
Magazines not currently available in the archive
The following years of Powder Injection Moulding International magazine are not yet available to download in PDF format. Information is provided on the contents of each issue, along with abstracts where available.
