Still time to register for MIM2018

February 14, 2018

MIM2018: Early-bird registration deadline draws near

MIMA’s MIM conference once again returns to the city of Irvine, California (Photo: justirvine)

 

MIM2018 is sponsored by the  Metal Powder Industries Federation & Metal Injection Molding Association and is one of the PIM industry’s leading events. Set to run from March 5-7 in Irvine, California, USA, the event will feature two days of conference sessions as well as a table-top exhibition sponsored by PIM International magazine. Also scheduled is an optional Powder Injection Moulding Tutorial by Randall M German, Professor Emeritus, San Diego State University.

Among the presentations to be given at MIM2018 are:

  • Keynote: Update on Forged Special Steels, Remelting and Powder Metallurgy
  • Moldability of Titanium-Based Feedstocks Used in Low-Pressure Powder Injection Molding
  • Using Bound Metal Deposition for MIM Prototyping
  • Process Monitoring and Control Systems as Basic Building Blocks for the 4th Industrial Revolution
  • Rationalization of Binders and Debinding
  • Cost Effective HIP – A Cost Calculation Study for MIM Parts
  • Lean Manufacturing Applications in MIM Value Streams
  • Effects of Molding Parameters on Part Distortion
  • Additive Manufacturing of Ti6Al4V Components to MIM Standards
  • Understanding Gating Strategy and the Effects on Characteristics of a Sintered Part
  • Characterisation of Different Tool Steels made by MIM
  • Material Developments in Binder Jet 3D Printing
  • Dry Ice in MIM Mold Cleaning
  • Study of 304L Stainless Steel Magnetic Permeability
  • MIM Material Properties of Novel AM Technology
  • Study of H900 Heat Treat Parameters of MIM 17-4 PH Stainless Steel
  • Predicting Viscosity Behavior for New Feedstock Development in Powder Injection Molding
  • Adoption of 3D Metal Printing in Key Vertical Markets Like Aerospace, Automotive and Medical
  • Influence of Feedstock Property Estimates on Powder Injection Molding Simulations and Experiments of PZT Micro-Pillar Arrays
  • Developing Binder-Jet AM Technology: Leveraging MIM

Details of speakers and abstracts are available via the event website.

Tabletop exhibition sponsored by PIM International magazine

A tabletop exhibition will be held as part of the event, featuring leading international suppliers to the PIM industry, including powder suppliers and producers of processing equipment.

Sponsored by Powder Injection Moulding International magazine, the tabletop exhibition will take place following the technical sessions on Tuesday, March 6. This will provide attendees with the opportunity to continue their interactions with fellow delegates and speakers over a drink and extend any ongoing discussions from the sessions.

Powder Injection Moulding Tutorial

This optional course, which requires a separate registration fee, is an ideal route for anyone looking to learn more about PIM to gain a solid and comprehensive foundation in the technology in a short period of time.

Topics covered will include:

  • Introduction to the manufacturing processes: feedstocks, moulding, debinding, sintering, and finishing
  • Definition of what constitutes a viable PIM component
  • Selection of materials based on component expectations and required properties
  • Assessment of the critical features of dimensional accuracy and material performance
  • Comparison of PIM to competing technologies
  • Review of the economic advantages of PIM
  • New applications, emerging markets, and examples of products never thought possible in net-shape manufacturing until PIM

www.mpif.org/meetings/2018/mim2018/index.asp

Powder Injection Moulding International magazine

In the latest issue of PIM International…

Download PDF

Extensive MIM, CIM industry and sinter-based AM industry news, plus the following exclusive deep-dive articles and reports:

  • Frank Petzoldt on the past, present and future of MIM
  • Saturation in metal Binder Jetting
  • Insights from the 2022 International Conference on Injection Molding of Metals, Ceramics and Carbides
  • Additive Manufacturing at CeramTec
  • The carbon footprint of injection moulding machines
  • Calculating the sintering shrinkage of MIM parts

The latest news from the MIM, CIM and sinter-based AM industries

Don't miss any new issue of PIM International, and stay up to date with the latest industry news. Sign up to our fortnightly newsletter.

Sign up

News from the industry…

    Discover our magazine archive…

    The free-to-access PIM International magazine archive offers unparalleled insight into the world of MIM, CIM and sinter-based AM from a commercial and technological perspective through:

    • Reports on visits to leading part manufacturers and industry suppliers
    • Articles on technology and application trends
    • Information on materials developments
    • Reviews of key technical presentations from the international conference circuit
    • International industry news

    All past issues are available to download as free PDFs or view in your browser.

     

    Browse the archive

     

    Looking for suppliers of materials, production equipment and finished MIM, CIM or sinter-based AM parts?

    Discover suppliers of these and more in our advertisers’ index and buyer’s guide, available in the back of PIM International.

    • Metal powders
    • MIM, CIM & AM parts producers
    • Binders & feedstocks
    • Feedstock mixers
    • Furnaces & furnace supplies
    • Atmospheres & gas generation
    • HIP systems & services
    • Injection moulding machines
    • AM technology
    • Debinding systems
    Download PDF
    Share via
    Copy link
    Powered by Social Snap