PIM International, Vol. 18 No. 2 Summer 2024

Prefer a PDF download? Click here

The 120-page Summer 2024 issue of PIM International (Vol. 18 No. 2) features over thirty pages of industry news, plus the following articles and technical reviews:

Industrialising innovation: Discovering the future of MIM at Schunk Sintermetalltechnik GmbH

In Metal Injection Moulding, as in all manufacturing industries, business can either be won by competing to be the lowest-cost supplier amongst fierce global competition, or by offering the most innovative technologies for the most demanding applications.

Here, Dr Georg Schlieper reports from a recent visit to Germany’s Schunk Sintermetalltechnik GmbH, a company that has taken the latter path, setting itself the goal of being a leading supplier to the aerospace industry and, at the same time, offering its customers unique solutions for the next generation of MIM applications.

A tooling expert’s ‘primer’ on Metal Injection Moulding: What technology newcomers need to know

Metal Injection Moulding often has an aura of mystery around it. Whilst those in the industry understand the technology well, there are many ‘on the outside’ who are more apprehensive.

In this article, Declan Coyle takes some of the mystery out of MIM technology in relation to tooling. Having gone through his own ‘MIM initiation’ process when tasked with developing the tooling for Apple’s Lightning connector in 2011, Coyle is well-positioned to offer some practical ‘do and don’t’ suggestions from a tooling engineer’s perspective.

Accelerating metal Binder Jetting in Greater China: MIM industry collaboration and a new applications centre with HP

If you were to place a bet on which country was going to take metal Binder Jetting to the highest volumes of commercial production, China would probably be high on your list. As the world’s manufacturing hub for consumer electronics, China already accounts for nearly half of global MIM sales by value. So with markets on the doorstep, and sintering capacity and metal powder supplies ready and waiting, where’s Binder Jetting in China? Here, Dr Q and Dr James report on developments, including a new Sintering Application Center at BJ–TECH Co. featuring HP’s Metal Jet technology.

Industry insight from the 2024 International Conference on Injection Molding Metals, Ceramics and Carbides

MIM2024, the International Conference on Injection Molding of Metals, Ceramics, and Carbides, was held in Raleigh, North Carolina, from February 26 to 28, 2024.

Attended by more than a hundred delegates from ten countries, this latest event in the well-established series was deemed to be an innovative success. This year was – to the relief of both attendees and the Metal Powder Industries Federation (MPIF) – an in-person only event.

Dr Animesh Bose, CEO, Optimus Alloys, reviews some of the highlights from the technical programme. 

< Back to 2024 archive