Launch issue of Metal Additive Manufacturing magazine now available to download

May 5, 2015

Launch issue of Metal AM magazine now available to download - Metal-AM-Vol-1-No-1-COVERS-The launch issue of Metal Additive Manufacturing, the new quarterly magazine for the metal Additive Manufacturing industry, is now available to download from the publication’s dedicated website: www.metal-am.com

Available in both print (ISSN 2057-3014) and digital (ISSN 2055-7183) formats, Metal Additive Manufacturing brings together industry news and articles on technical and commercial developments in the industry. The publication of this new magazine follows the successful launch of the www.metal-am.com website in May 2014.

The 64 page launch issue includes a report on a recent visit to leading European metal AM parts producer Materials Solutions, based in Worcester, UK. Materials Solutions is a key supplier to the aerospace and high performance motorsport industries. In our exclusive report the company’s founder and Managing Director, Carl Brancher, shares his thoughts on the current status of the metal Additive Manufacturing industry and the opportunities and challenges ahead.

Also featured in this issue is an extensive report on component design considerations for powder bed fusion technologies. As Tim Richter, RSC Engineering GmbH, Germany, explains, this technology has the potential to fundamentally change the design process and appearance of new products. Designers must, however, be aware of all design considerations to maximise the potential of their products.

Jon Craxford, Sales Director at Inovar Communications, a publishing house with over twelve years of experience in the metal powder processing industries, commented, “We are delighted with the support that we have received from industry suppliers, component manufacturers, trade organisations and international industry events.”

 

In this issue

Metal Additive Manufacturing: Component design for successful commercial production

With Additive Manufacturing, the next generation of component fabrication technologies has arrived. No other technology, explains Tim Richter, of RSC Engineering GmbH, Germany, has the potential to change the design process and the appearance of new products so fundamentally. In this report for Metal Additive Manufacturing magazine, Richter shares his experiences in designing metal AM components for powder bed fusion based AM systems, explaining both the potential and the limitations of the process.

 

Materials Solutions: Expertise in metal Additive Manufacturing for the aerospace and motorsport industries

Materials Solutions Limited, located in Worcester, UK, is a world-class specialist in the Additive Manufacturing of functional parts using the Selective Laser Melting process. Dr David Whittaker reports for Metal Additive Manufacturing magazine on a visit to the company, where he spoke with founder and Managing Director, Carl Brancher.

 

MAMC 2014: Vienna’s Metal AM Conference reports on progress in a rapidly changing industry

More than 150 participants from 19 countries attended the Metal Additive Manufacturing Conference (MAMC), Vienna, November 20-21, 2014. The conference, organised by the Austrian Society for Metallurgy and Metals (ASMET) and voestalpine Edelstahl, reviewed the latest developments along the entire processing chain as well as novel applications. Prof. Bruno Buchmayr, Montanuniversität Leoben, and Prof. Juergen Stampfl, TU Wien, present an introduction to Additive Manufacturing and report on highlights from the MAMC 2014 conference.

 

www.metal-am.com

 

In the latest issue of PIM International…

Download PDF

Extensive MIM, CIM industry and sinter-based AM industry news, plus the following exclusive deep-dive articles and reports:

  • Calling all product designers: Discover what Metal Injection Moulding could do for you through these award-winning parts
  • Binder Jetting of a dual-phase steel: Process insight and optimisation using the Master Sintering Curve
  • The rise of filament-based metal AM: New materials and machines present opportunities for MIM producers
  • Sinter-based Additive Manufacturing at the 20th Plansee Seminar on Refractory Metals and Hard Materials
  • Ceramitec 2022: Opportunities abound for producers of technical ceramics by CIM and AM

The latest news from the MIM, CIM and sinter-based AM industries

Don't miss any new issue of PIM International, and stay up to date with the latest industry news. Sign up to our fortnightly newsletter.

Sign up

News from the industry…

    Discover our magazine archive…

    The free-to-access PIM International magazine archive offers unparalleled insight into the world of MIM, CIM and sinter-based AM from a commercial and technological perspective through:

    • Reports on visits to leading part manufacturers and industry suppliers
    • Articles on technology and application trends
    • Information on materials developments
    • Reviews of key technical presentations from the international conference circuit
    • International industry news

    All past issues are available to download as free PDFs or view in your browser.

     

    Browse the archive

     

    Looking for suppliers of materials, production equipment and finished MIM, CIM or sinter-based AM parts?

    Discover suppliers of these and more in our advertisers’ index and buyer’s guide, available in the back of PIM International.

    • Metal powders
    • MIM, CIM & AM parts producers
    • Binders & feedstocks
    • Feedstock mixers
    • Furnaces & furnace supplies
    • Atmospheres & gas generation
    • HIP systems & services
    • Injection moulding machines
    • AM technology
    • Debinding systems
    Download PDF
    Share via
    Copy link
    Powered by Social Snap