Formnext 2020 to be a virtual-only event amid ongoing COVID crisis

September 2, 2020

Formnext 2020 will now take place as Formnext Connect, a virtual only event (Courtesy Mesago Messe Frankfurt GmbH)

Mesago Messe Frankfurt GmbH, the organiser of Formnext, the leading international event for Additive Manufacturing/3D printing, has confirmed that it will now be held solely as a virtual event. Named ‘Formnext Connect’, the dates of the event, November 10–13, 2020, will remain unchanged.

In an official statement, the organiser explained, “Due to the recent rise of the COVID-19 infection figures worldwide, and the associated increase in travel restrictions, Mesago Messe Frankfurt GmbH has decided to hold Formnext 2020 purely virtually.”

“The digital event will be named ‘Formnext Connect’. Formnext 2020 was previously planned as a hybrid trade fair, that is, with the on-site event at the Frankfurt exhibition grounds plus a digital add-on component. This plan was based on the Corona Contact and Operating Restrictions Ordinance valid in the State of Hesse and a health and hygiene concept agreed upon with the City of Frankfurt am Main, the State of Hesse and Messe Frankfurt.”

Formnext Connect will reportedly offer a wide range of digital services which will include exhibitor presentations in showrooms (products, information, videos, chat function, lead generation/lead tracking), intelligent matchmaking with all participants supported by AI, live streaming and on-demand content of the supporting programme and webinars as well as the scheduling/assignment of appointments for online meetings with exhibitors. Further details are expected to be announced shortly

Petra Haarburger, president of Mesago Messe Frankfurt, stated, “The current rise of the COVID-19 infection figures in Germany, Europe and around the world have led to increasing uncertainty among exhibitors and visitors. Together with the renewed tightening of official and in-house travel restrictions, this will no longer allow the otherwise highly international Formnext to be carried out in the accustomed quality.”

Sascha F Wenzler, vice president of Formnext Mesago Messe Frankfurt, commented, “We have been planning Formnext 2020 for months now. We have done this consistently and with the full support of our Exhibitor Advisory Board and with the highest level of protection and safety for the health of our exhibitors and visitors.”

“In doing so, we examined the entire layout of the fair from scratch from the halls with all entrances, booths, to the aisles. We devised completely new stand construction packages, spacing and communication areas in accordance with the health and hygiene concept agreed with the authorities. Our disappointment at the end of the summer is all the greater now that we have to recognise that the course of the pandemic is destroying our efforts to make these personal encounters possible again.”

Wenzler added, “An exchange between technology providers and users is absolutely necessary for this, and we are now putting all our energy into the realisation of a virtual Formnext, the Formnext Connect. It will be the central virtual platform for business and knowledge exchange for the global AM community at the end of the year.”

The organiser explains that in the course of the crisis, the Additive Manufacturing industry has clearly demonstrated the potential that lies in flexible, diversified and decentralised production. There is no doubt that AM will be one of the leading technologies that will lead the way out of the recession and will play a major role in the development of new products, the design of resilient supply chains and the development of sustainable business models, reports Mesago Messe Frankfurt GmbH.

www.formnext.mesago.com

In the latest issue of PIM International…

Download PDF

Extensive MIM, CIM industry and sinter-based AM industry news, plus the following exclusive deep-dive articles and reports:

  • INMATEC Technologies: Celebrating 25 years as a driving force behind Ceramic Injection Moulding
  • A year of change: Turbulence in China’s MIM industry as markets evolve
  • Ceramic Injection Moulding: The impact of variotherm and conformal cooling technology on part quality and process capability
  • The Additive Manufacturing of multi-material and multi-functional ceramic components

The latest news from the MIM, CIM and sinter-based AM industries

Don't miss any new issue of PIM International, and stay up to date with the latest industry news. Sign up to our fortnightly newsletter.

Sign up

Join our community

Discover our magazine archive…

The free-to-access PIM International magazine archive offers unparalleled insight into the world of MIM, CIM and sinter-based AM from a commercial and technological perspective through:

  • Reports on visits to leading part manufacturers and industry suppliers
  • Articles on technology and application trends
  • Information on materials developments
  • Reviews of key technical presentations from the international conference circuit
  • International industry news

All past issues are available to download as free PDFs or view in your browser.

 

Browse the archive

 

Looking for suppliers of materials, production equipment and finished MIM, CIM or sinter-based AM parts?

Discover suppliers of these and more in our advertisers’ index and buyer’s guide, available in the back of PIM International.

  • Metal powders
  • MIM, CIM & AM parts producers
  • Binders & feedstocks
  • Feedstock mixers
  • Furnaces & furnace supplies
  • Atmospheres & gas generation
  • HIP systems & services
  • Injection moulding machines
  • AM technology
  • Debinding systems
View online
Share via
Copy link
Powered by Social Snap