Meet us at Rapid!
We’re excited to once again be a key media partner for RAPID + TCT 2024 in Los Angeles! As the leading media channel for the metal AM industry, we are dedicated to keeping you up-to-date ... Read more »
Metal Injection Molding | CIM | sinter-based AM event news
Lithoz to showcase ceramic Additive Manufacturing at Rapid + TCT
Lithoz GmbH, based in Vienna, Austria, will highlight its global ‘Ceramic 3D Factory’ network and launch the CeraControl software at the upcoming Rapid + TCT event, held in Los Angeles, USA, June 25-27. In its world ... Read more »
Formnext + PM South China highlights China’s metal powder-based manufacturing ambitions
Formnext + PM South China will return to the Shenzhen World Exhibition and Convention Center from August 28-30, 2024, buoyed by a Chinese government report classifying Additive Manufacturing and Powder Metallurgy ... Read more »
Registration opens for Euro PM2024 Powder Metallurgy Congress and Exhibition
Registration is now open for the Euro PM2024 Congress & Exhibition. Organised by the European Powder Metallurgy Association (EPMA), the event will take place from September 29-October 2 in Malmö, Sweden ... Read more »
Registration opens for MPIF’s Powder Metallurgy Basic Short Course 2024
Registration for the Metal Powder Industries Federation (MPIF)’s Basic Powder Metallurgy Short Course, is now open. The event, now in its 60th year, is scheduled to take place August 12-14, 2024, at the Penn Stater Hotel ... Read more »
Formnext Chicago to showcase the Additive Manufacturing industry in April 2025
Germany’s Mesago Messe Frankfurt, organiser of the Formnext series of Additive Manufacturing industry events, has confirmed that it is bringing the format to the USA, with the new Formnext Chicago set to take place April 8-10 ... Read more »
RAPID + TCT bringing over 400 exhibitors to Los Angeles
RAPID + TCT 2024, scheduled to take place June 25-27, 2024, at the Los Angeles Convention Center in Los Angeles, California, USA, is expecting to host over 400 exhibitors at this year’s event. The event, organised by SME ... Read more »
Dates announced for 21st Plansee Seminar
The 21st Plansee Seminar has been announced for June 1-6, 2025, at the Plansee Group’s facility in Reutte, Austria. Returning to its usual four-year cycle, the conference will enable participants to openly discuss all aspects ... Read more »
EPMA releases EURO PM2024 Congress & Exhibition Technical Programme
The European Powder Metallurgy Association (EPMA) has published the Technical Programme for the Euro PM2024 Congress & Exhibition. The event is scheduled to take place September 29 – October 2, 2024 ... Read more »
Atomisation for Metal Powders short course set for September 2024
Atomising Systems Ltd (ASL), headquartered in Sheffield, North Yorkshire, UK, has announced that the sixteenth edition of its two-day course, Atomisation for Metal Powders, will take place in Manchester, UK, September 26-27 ... Read more »
In the latest issue of PIM International…
| Download PDF |
Extensive MIM, CIM industry and sinter-based AM industry news, plus the following exclusive deep-dive articles and reports:
- Metal Injection Moulding in Asia: Scale, supply chains, and growing overlap with metal Additive Manufacturing
- Chanel’s J12: How Ceramic Injection Moulding became part of the luxury narrative
- Ceramic AM enables 500 mm dual-channel gas distribution ring for high-speed PEALD and ALE in the same chamber
- From hypersonics to EVs: Sintering non-oxide ceramics for next-generation technologies
- ColdMetalFusion: A new approach to metal Additive Manufacturing
Buyer’s Guide: feedstock, powder, production technology and MIM, CIM and AM parts
Join our community