ExOne and Pittsburgh University produce additively manufactured metal filters for reusable respirators

April 28, 2020

ExOne has additively manufactured filters in copper, as well as stainless steel, to test different porosities, airflows and filtration capabilities (Courtesy The ExOne Company)

The ExOne Company, North Huntingdon, Pennsylvania, USA, has collaborated with the University of Pittsburgh, Pennsylvania, USA, to develop reusable porous metal additively manufactured filters that fit into a specially designed plastic respirator cartridge for sustainable, long-term protection against contaminants, such as coronavirus (COVID-19).

By utilising its Binder Jetting technology, ExOne states that it has additively manufactured respirator filters in two metals, copper and 316L stainless steel, and a range of porosity levels for use inside a unique cartridge designed by the Mechanical Engineering & Materials Science department in the Pitt Swanson School of Engineering, part of the University of Pittsburgh. Initial testing for airflow and filtration efficiency is believed to be currently underway, and the filters are being optimised with the goal of adhering to an N95 respirator standard.

“Our team has been working urgently to expedite this promising and reusable solution for medical personnel on the frontlines of fighting the COVID-19 pandemic,” stated John Hartner, ExOne CEO. “Our customers routinely print porous metal filters for a variety of purposes, and we are confident that we’ll have a solution soon that can enable medical personnel to sterilise metal filters for repeated reuse, eliminating waste. Once approved, we can print these filters in a variety of sizes for respirators, ventilators, anesthesia masks or other equipment.”

“The advantage of binder jet 3D printing over other Additive Manufacturing methods for this filter application is the ability to utilise the porosity of the printed part and then fine tune it during the high temperature densification or sintering process to achieve optimum filtering and airflow performance,” explained Markus Chmielus, Associate Professor of Mechanical Engineering and Materials Science at the Swanson School.

ExOne additively manufactured a reusable, sterilisable copper filter to fit inside a cartridge designed and additively manufactured by Pittsburgh University (Courtesy The ExOne Company)

ExOne’s Binder Jetting technology uses an industrial printhead to selectively deposit a liquid binder onto a thin layer of powdered material, layer by layer, until a final object is formed. After additively manufacturing powdered metals, the object is then sintered in a furnace to dial in a specific level of porosity. While binder jetted metal is typically sintered to full density, some applications require a specific level of porosity, such as filters.

To test filters in different metals and porosities, Dr Chmielus’ research group is using CT scanners to analyse the microstructure and porosity of the filters. Ansys, a global leader in engineering simulation, also based near Pittsburgh, is providing additional computer simulation support to analyse and optimise the performance of the filters.

ExOne explains that while copper and stainless steel filters are currently being tested, copper has been recognised for its antibacterial properties for some time. The first recorded instance of using copper to tackle germs was in the Edwin Smith Papyrus, said to be the oldest known medical document in history, according to the Smithsonian. The company goes on to say that many studies have also proven copper’s disinfectant powers. One landmark 2015 study, funded by the Department of Defense, revealed that copper alloys contributed to a 58% reduction in infections and COVID-19 research also suggests the virus dies faster on copper than on other surfaces.



In the latest issue of PIM International…

Download PDF

Extensive MIM, CIM industry and sinter-based AM industry news, plus the following exclusive deep-dive articles and reports:

  • Global Markets for Metal Injection Moulding: Data and insight from World PM2022 and beyond
  • HP Metal Jet: Growing momentum and new applications as Binder Jetting comes of age
  • Sintex: Exploring the full flexibility of metal powder-based processes for corrosion-resistant applications
  • Tritone’s MoldJet: The definition-defying AM technology advancing steadily toward commercialisation
  • The metal powder-based processing of titanium: MIM and AM-related highlights from the PMTi2022 conference
  • Opening the door to MIM parts: A case study on the conversion of die cast door hinges

The latest news from the MIM, CIM and sinter-based AM industries

Don't miss any new issue of PIM International, and stay up to date with the latest industry news. Sign up to our fortnightly newsletter.

Sign up

Join our community

News from the industry…

    Discover our magazine archive…

    The free-to-access PIM International magazine archive offers unparalleled insight into the world of MIM, CIM and sinter-based AM from a commercial and technological perspective through:

    • Reports on visits to leading part manufacturers and industry suppliers
    • Articles on technology and application trends
    • Information on materials developments
    • Reviews of key technical presentations from the international conference circuit
    • International industry news

    All past issues are available to download as free PDFs or view in your browser.


    Browse the archive


    Looking for suppliers of materials, production equipment and finished MIM, CIM or sinter-based AM parts?

    Discover suppliers of these and more in our advertisers’ index and buyer’s guide, available in the back of PIM International.

    • Metal powders
    • MIM, CIM & AM parts producers
    • Binders & feedstocks
    • Feedstock mixers
    • Furnaces & furnace supplies
    • Atmospheres & gas generation
    • HIP systems & services
    • Injection moulding machines
    • AM technology
    • Debinding systems
    Download PDF
    Share via
    Copy link
    Powered by Social Snap