Autumn 2017 issue of Metal AM magazine now available for free download

October 6, 2017

 

The Autumn 2017 issue of Metal Additive Manufacturing magazine has been released and is available to read for free as a digital download, or in print through the purchase of a magazine subscription.

In addition to over 75 pages of the latest industry news, the 128-page issue features in-depth reports on Honeywell’s progress in AM for aerospace, innovations in binder-based AM and conformal cooling at RapidTech + FabCon 3D, two special case studies on Design for Additive Manufacturing, and a look at the impact of powder reuse in metal Additive Manufacturing.

 

 

Honeywell: Driving AM application and supply chain development in the aerospace industry

Over the past decade Honeywell has been a leader in accelerating the adoption of metal Additive Manufacturing in the aerospace industry. With dedicated facilities in five countries, the company is at the forefront of the development of new commercial aerospace applications and the supply chain needed to implement series production.

Dr Dhruv Bhate, Associate Professor in the Polytechnic School at Arizona State University, visited Honeywell’s Phoenix facility on behalf of Metal AMmagazine and met with Donald Godfrey, an Engineering Fellow at Honeywell and the person most credited with initiating and directing the company’s progress in the field of metal AM.

 

RapidTech + FabCon 3D: Innovations in binder-based AM and advances in conformal cooling

From June 20-22, 2017, the German city of Erfurt became a centre of gravity for Additive Manufacturing, hosting the annual RapidTech technical conference and its accompanying trade exhibition, FabCon 3D.

Dr Georg Schlieper visited the event for Metal Additive Manufacturingmagazine and highlights a number of innovative trends in metal Additive Manufacturing process technology and applications, including the latest binder-based Additive Manufacturing technologies and innovations in toolmaking.

 

Design for Additive Manufacturing: Increasing part value through intelligent optimisation

Paying the right amount of attention to Design for Additive Manufacturing (DfAM) can make the difference between economic success and failure. When considering Additive Manufacturing for production applications, it is important to consider designing, or redesigning, parts that would otherwise be produced using conventional manufacturing.

In this case study, Terry Wohlers and Professor Olaf Diegel, both of Wohlers Associates, reveal how industrial mining machine manufacturer Atlas Copco has used DfAM to increase the value of a hydraulic manifold.

 

Design for Additive Manufacturing: Transforming RF antennas through intelligent optimisation

Additive Manufacturing presents the opportunity to completely rethink a product’s design, transforming its functionality and reducing manufacturing complexity. With the right application and the right approach, the results really can live up to industry buzzwords such as ‘disruptive’ and ‘transformational’.

In the following article, Optisys LLC reveals how, through intelligent design optimisation, the company has used Additive Manufacturing to develop the next generation of RF antenna systems for aerospace and defence.

 

AMPM2017: Understanding the impact of powder reuse in metal Additive Manufacturing

An issue of significant current interest to the AM world, which can potentially impact both the quality and cost-effectiveness of built parts, is whether there is a limit on the number of times that metal powders can be cycled around an AM process.

In this article, Dr David Whittaker reviews three presentations on the topic from AMPM2017, the fourth annual Additive Manufacturing with Powder Metallurgy Conference, held in Las Vegas, USA, June 13-15, 2017.

 

 

Download issue

Subscribe to print edition

 

 

In the latest issue of PIM International…

Download PDF

Extensive MIM, CIM industry and sinter-based AM industry news, plus the following exclusive deep-dive articles and reports:

  • Calling all product designers: Discover what Metal Injection Moulding could do for you through these award-winning parts
  • Binder Jetting of a dual-phase steel: Process insight and optimisation using the Master Sintering Curve
  • The rise of filament-based metal AM: New materials and machines present opportunities for MIM producers
  • Sinter-based Additive Manufacturing at the 20th Plansee Seminar on Refractory Metals and Hard Materials
  • Ceramitec 2022: Opportunities abound for producers of technical ceramics by CIM and AM

The latest news from the MIM, CIM and sinter-based AM industries

Don't miss any new issue of PIM International, and stay up to date with the latest industry news. Sign up to our fortnightly newsletter.

Sign up

News from the industry…

    Discover our magazine archive…

    The free-to-access PIM International magazine archive offers unparalleled insight into the world of MIM, CIM and sinter-based AM from a commercial and technological perspective through:

    • Reports on visits to leading part manufacturers and industry suppliers
    • Articles on technology and application trends
    • Information on materials developments
    • Reviews of key technical presentations from the international conference circuit
    • International industry news

    All past issues are available to download as free PDFs or view in your browser.

     

    Browse the archive

     

    Looking for suppliers of materials, production equipment and finished MIM, CIM or sinter-based AM parts?

    Discover suppliers of these and more in our advertisers’ index and buyer’s guide, available in the back of PIM International.

    • Metal powders
    • MIM, CIM & AM parts producers
    • Binders & feedstocks
    • Feedstock mixers
    • Furnaces & furnace supplies
    • Atmospheres & gas generation
    • HIP systems & services
    • Injection moulding machines
    • AM technology
    • Debinding systems
    Download PDF
    Share via
    Copy link
    Powered by Social Snap