Claus Emmelmann to step down as Director of Fraunhofer IAPT

May 21, 2020

From left to right: Prof. Dr.-Ing. Claus Emmelmann and Prof. Dr.-Ing. Dr. h.c. Ralf-Eckhard Beyer (Courtesy Fraunhofer IAPT)

Prof. Dr.-Ing. Claus Emmelmann, Director of The Fraunhofer Research Institution for Additive Manufacturing Technologies (IAPT) is to step down from his role. 

The role of director will be held by Prof. Dr.-Ing. Dr. h.c. Ralf-Eckhard Beyer while a new director is agreed with the Executive Board of the Fraunhofer-Gesellschaft (Fraunhofer Society) and the TUHH, in order to successfully develop  the IAPT over the next ten years. 

Emmelmann commented, “I would like to thank the President of the Fraunhofer-Gesellschaft for having agreed to my request to be released from my office as head of the institute for personal reasons as of June 2020, so that I can devote myself to new challenges.”

He continued, “As acting director of the Institute for Laser and System Technologies (iLAS) at the Hamburg University of Technology (TUHH), I will continue to support the Fraunhofer IAPT in the future and will actively support the research and training of potential scientific staff at the TUHH for the Fraunhofer IAPT.”

www.iapt.fraunhofer.de

Industry News

Read the latest issue of PIM International

The latest issue of PIM International magazine is available to view online or download in PDF format.

As well as an extensive MIM, CIM industry and sinter-based AM industry news section, this 112-page issue includes the following exclusive articles and reports:

  • Metal Injection Moulding in China: Market opportunities and research activities
  • A beginner’s guide to three leading sinter-based metal Additive Manufacturing technologies
  • MIM superalloys: The effect of lower-cost nitrogen atomisation on properties of sintered IN713C
  • Euro PM2019: Innovations in Powder Injection Moulding process simulation and control
  • > Go to magazine page

E-newsletter

Register for our e-newsletter and we'll let you know each time a new issue of PIM International magazine is available, as well as keeping you informed of MIM and CIM industry developments.

Industry News

Copy link
Powered by Social Snap