Processing of metal & ceramic injection moulded components

A Case Study on Computational Fluid Dynamics Analysis of Micro-MIM Products

Technical Paper: PIM International, Vol.4 No.1 March 2010, pages 55-65, 5013 words

Authors: Ian Andrews [1], Kazuaki Nishiyabu [2] and Shigeo Tanaka [3]

Design and Manufacture of Gears with a Skin-Core Structure by Metal Co-Injection Moulding

Technical Paper: PIM International, Vol.4 No. 1 March 2010, pages 50-54, 2265 words

Authors: Hao He, Yimin Li, Pan Liu and Jianguang Zhang

Looking into a MIM furnace: Understanding debinding and sintering using mass spectrometry

Feature article: PIM International, Vol.4 No. 1 March 2010, pages 43-46, 1789 words

Authors: Dr Thomas Hartwig, IFAM, Germany [1] and Renan Schroeder, Federal University of Santa Catarina, Brazil

Multifunctional parts by two-component Powder Injection Moulding (2C-PIM)

Feature article: PIM International, Vol.4 No.1 March 2010, pages 21-27, 3465 words

Author: Dr. - Ing. Frank Petzoldt, Fraunhofer IFAM, Germany

Application of a simulation tool in powder injection moulding (PIM)

Technical Paper: PIM International, Vol.3 No. 4 December 2009, pages 60-65, 2741 words

Authors: Seokyoung Ahn [1], Seong-Taek Chung [2], Seong Jin Park [3], and Randall M. German [4]

Influence of sintering conditions and furnace technology on chemical and mechanical properties of injection moulded 316L

Technical Paper: PIM International, Vol.3 No. 4 December 2009, pages 66-70, 3398 words

Authors: Steffen Krug [1] and Stefan Zachmann [2]

Preventative quality assurance for PIM producers: A new batch-to-batch feedstock testing method

Feature article: PIM International, Vol.3 No. 4 December 2009, pages 50-52, 1482 words

Author: Hartmut Walcher, Arburg, Geramny

Back to basics: putting the finishing touches to metal injection moulded components

Feature article: PIM International, Vol.3 No. 3 September 2009, pages 35-40, 3346 words

Author: Dr Georg Schlieper, Ingenieurbüro Gammatec, Germany

Magnetic properties of alnico 8 sintered magnets produced by powder injection moulding

Technical Paper: PIM International, Vol.3 No. 3 September 2009, pages 58-63, 2590 words

Authors: B. S. Zlatkov [1], U. Bavdek [2], M.V. Nikolic [3], O.S. Aleksic [3], H. Danninger [4], C. Gierl [4] and A. Erman [2]

Micro metal injection moulding for thermal management applications using ultrafine powders

Technical Paper: PIM International, Vol.3 No. 2 June 2009, pages 54-58, 1840 words

Author: H. Schmidt [1], A. C. Rota [1], Ph. Imgrund [1] and M. Leers [2]

PIM 2009 Conference Review: Industry remains upbeat despite global recession

Feature article: PIM International, Vol.3 No. 2 June 2009, pages 47-51, 1907 words

Author: Nick Williams, PIM International, Shrewsbury, UK

Advanced metal powder injection moulding for multilayered micro porous titanium components

Technical Paper: PIM International, Vol.3 No. 1 March 2009, pages 60-63, 1939 words

Author: Kazuaki Nishiyabu [1], Satoru Matsuzaki [2] & Shigeo Tanaka [2]

Back to basics: Sintering and furnace technology

Feature article: PIM International, Vol.3 No. 1 March 2009, pages 21-27, 3251 words

Author: Dr. Georg Schlieper, Ingenieurbüro Gammatec, Germany

Co-sintering of functionally graded Fe2Ni/Fe2NixCr composites

Technical Paper: PIM International, Vol.3 No. 1 March 2009, pages 56-59, 1939 words

Author: Hao He, Yimin Li, Jia Lou and Jianguang Zhang

Sintered Ba hexaferrite shaped by powder injection moulding in a DC magnetic field

Technical Paper: PIM International, Vol.3 No. 1 March 2009, pages 50-55, 2819 words

Author: B. S. Zlatkov [1], M. V. Nikolic [2], H. Danninger [3] and O. Aleksic [2]

Accuracy evaluation of ultra-compact gears manufactured by the microMIM process

Technical Paper: PIM International, Vol.2 No. 4 December 2008, pages 60-63, 1264 words

Authors: Kazuaki Nishiyabu [1] Ian Andrews [1] and Shigeo Tanaka [2]

Influence of carbon content on microstructure and tensile properties of the 17-4 PH stainless steel produced by MIM

Technical Paper: PIM International, Vol.2 No. 4 December 2008, pages 56-59, 2019 words

Authors: P. V. Muterlle [1], M. Zendron [2], M. Perina [2], R. Bardini [2] & A. Molinari [1]

Cooling performance of tube X-COOLER shaped by MIM technology

Technical Paper: PIM International, Vol.2 No. 3 September 2008, pages 64-68, 2477 words

Authors: B. S. Zlatkov [1], H. Danninger [2], O.S.Aleksic [3]

Liquid infiltration property of micro-porous stainless steel produced by powder space holder method

Technical Paper: PIM International, Vol.2 No. 3 September 2008, pages 60-63, 1868 words

Authors: Kazuaki Nishiyabu [1], Satoru Matsuzaki [2] and Shigeo Tanaka [2]

Micro-channelled heat exchanger manufactured by Ceramic Injection Moulding and co-firing

Technical Paper: PIM International, Vol.2 No. 3 September 2008, pages 69-71, 1351 words

Authors: Luc Federzoni and Pascal Revirand

PM2008 World Congress Review Part 1: Modelling enhances PIM processing

Feature article: PIM International, Vol.2 No. 3 September 2008, pages 36-41, 2830 words

Author: Dr. David Whittaker, DW Associates, UK

A study of the effects of sintering parameters on the microstructure and properties of PIM Ti6Al4V alloy

Technical Paper: PIM International, Vol.2 No. 2 June 2008, pages 74-78, 2507 words

Authors: R. Zhang, J. Kruszewski and J. Lo

Material homogeneity in powder injection moulded ceramic microchannel arrays

Technical Paper: PIM International, Vol.2 No. 2 June 2008, pages 68-73, 2780 words

Authors: Carl Wu [1], Sundar V. Atre [1], Sachin Laddha [1], Shiwoo Lee [1], Kevin Simmons [2], Seong-Jin Park [3], Randall M. German [3] and Donald T. Whychell, Sr. [4]

Back to Basics: Injection moulding is no problem!

Feature article: PIM International, Vol.2 No. 1 March 2008, pages 21-28, 4048 words

Author: Dr. Georg Schlieper, Ingenieurbüro Gammatec, Germany

Developments in multi-component powder injection moulding of steel-ceramic compounds using green tapes for inmould label process

Technical Paper: PIM International, Vol.2 No. 1 March 2008, pages 55-58, 1596 words

Authors: A. Baumann, M. Brieseck, S. Höhn, T. Moritz & R. Lenk

Powder injection moulding of NiTi shape memory materials

Technical Paper: PIM International, Vol.2 No. 1 March 2008, pages 59-62, 1470 words

Authors: J.-E. Bidaux, A. Jochem and E. Carreño-Morelli

Al/SiC composites with high reinforcement content prepared by PIM/pressure infiltration

Technical Paper: PIM International, Vol.1 No. 4 December 2007, pages 53-55, 1504 words

Authors: Xiangquan Liu, Yimin Li, Fenghua Luo and Meiling Li

Laminar gas flow presents new opportunities for efficient debinding and sintering

Feature article: PIM International, Vol.1 No. 4 December 2007, pages 47-49, 1368 words

Authors: Claus J. Joens, Elnik Systems, USA [1] and Satyajit Banerjee, DSH Technologies LLC, USA [2]

Material homogeneity in powder injection moulded ceramic microchannel arrays

Technical Paper: PIM International, Vol.2 No. 2 June 2008, pages 68-73, 2780 words

Authors: Carl Wu [1], Sundar V. Atre [1], Sachin Laddha [1], Shiwoo Lee [1], Kevin Simmons [2], Seong-Jin Park [3], Randall M. German [3] and Donald T. Whychell, Sr. [4]

Research on the metal injection moulding of housings for the semiconductor industry

Technical Paper: PIM International, Vol.1 No. 4 December 2007, pages 56-59, 2294 words

Authors: Zhang Chi, Xu Bo and Wu Ziguang

Powder injection moulding of cemented carbides for the production of micro parts and micro structured parts

Technical Paper: PIM International, Vol.1 No. 3 September 2007, pages 56-58, 1969 words

Authors: L. Merz, S. Rath and B. Zeep

Debinding process and carbon content control of hardmetal components by powder injection moulding

Technical Paper: PIM International, Vol.1 No. 2 June 2007, pages 57-62, 3699 words

Authors: J. L. Fan, Z. X. Li, B. Y. Huang, H. C. Cheng and T. Liu

Developments in continuous debinding and sintering solutions for MIM

Feature article: PIM International, Vol.1 No. 2 June 2007, pages 34-37, 1724 words

Author: Peter Vervoort, ELINO Industrie Ofenbau, Germany

Global research and development in powder injection moulding

Author: Professor Randall M. German, San Diego State University, USA

Manufacturing and characterisation of isolated microparts made by PIM for a micro annular gear pump

Technical Paper: PIM International, Vol.1 No. 2 June 2007, pages 48-53, 2554 words

Author: T. Gietzelt [1], O. Jacobi [2], V. Piotter [2], R. Ruprecht [2] and J. Hausselt [2] 

Powder injection moulding finds favour in EU collaborative research funding

Feature article: PIM International, Vol.1 No. 2 June 2007, pages 40-44, 2811 words

Author: Bernard Williams, Consultant, Shrewsbury, UK

Simulation-based design for powder injection moulding

Technical Paper: PIM International, Vol.1 No. 2 June 2007, pages 54-56, 1269 words

Authors: C. Hinse [1], R. Zauner [2], R. Nagel [2], P. Davies [3] and M. Kearns [3]

CAE-based process design of PIM for microfluidic device components

Technical Paper: PIM International, Vol.1 No. 1 March 2007, pages 53-58, 3103 words

Authors: Roshan Urval [1], Carl Wu [1], Sundar V. Atre [1], Seong-Jin Park [2] and Randall M. German [2]

Developments in the powder injection moulding of titanium at EuroPM2006

Author: Dr David Whittaker, DW Associates, UK 

Powder injection moulding at the PM2006 World Congress, Busan, Korea

Feature Article: PIM International, Vol.1 No. 1 March 2007, pages 40-44, 2006 words

Author: Bernard Williams, Consultant, Shrewsbury, UK