Shopping Basket
Download content from PIM International

Developments in multi-component powder injection moulding of steel-ceramic compounds using green tapes for inmould label process
More...
Influence of sintering conditions and furnace technology on chemical and mechanical properties of injection moulded 316L
More...
Sintering Equipment and Atmospheres used in Powder Metallurgy
More...
Zhuzhou Lukes - Metal Injection Moulding flourishes in Zhuzhou, China's hardmetal capital
More...
Demand for precision components set to drive Chinese PIM manufacturing into the mainstream
More...
Binders, Feedstock & Powders
Articles and technical papers covering Materials for Powder Injection Moulding
- All documents are in PDF Format
- Immediate download via email link
- Secure online payment with Visa, MasterCard or American Express
- Online access to your invoice and receipt
- For more information visit our help page
Influence of Particle Size Distribution and Chemical Composition of the Powder on Final Properties of Inconel 718 Fabricated by Metal Injection Moulding (MIM)
Technical Paper: PIM International, Vol.4 No.1 March 2010, pages 67-70, 1907 words
Metal injection moulding of a new Fe-8Ni micron-size pre-alloyed powder
Technical Paper: PIM International, Vol.3 No. 4 December 2009, pages 54-59, 2107 words
Characterisation of alumina feedstock with polyacetal and wax-polymer binder systems for micro powder injection moulding
Technical Paper: PIM International, Vol.3 No. 3 September 2009, pages 64-70, 2863 words
Mixing simulation for powder injection moulding feedstock: Quantification by the mixing entropy
Technical Paper: PIM International, Vol.3 No. 2 June 2009, pages 59-62, 1959 words
Quantitative study of powder binder separation of feedstocks
Technical Paper: PIM International, Vol.2 No. 4 December 2008, pages 50-55, 2653 words
Feedstock for Powder Injection Moulding: production and commercial suppliers
Feature article: PIM International, Vol.2 No. 3 September 2008, pages 23-32, 3736 words
Production of fine titanium powders via the Hydride-Dehydride (HDH) process
Feature article: PIM International, Vol.2 No. 2 June 2008, pages 55-57, 991 words
Moulding properties and causes of deterioration of recycled Metal Injection Moulding feedstock
Technical Paper: PIM International, Vol.1 No. 3 September 2007, pages 54-55, 881 words
Study of the rheological properties of a new bronze 90/10 feedstock based on irregular powder particles for application in powder injection moulding (PIM)
Technical Paper: PIM International, Vol.1 No. 3 September 2007, pages 59-62, 2374 words
The impact of REACH on the powder injection moulding industry
Feature article: PIM International, Vol.1 No. 3 September 2007, pages 43-51, 4449 words
Powders, binders and feedstocks for powder injection moulding
Feature article: PIM International, Vol.1 No. 1 March 2007, pages 34-39, 4005 words
















