Shopping Basket
Download content from PIM International
Fraunhofer IFAM: A commitment to industry oriented research helps drive MIM product development
More...
High Density, High Performance Powder Metallurgy Components
More...
Feedstock for Powder Injection Moulding production and commercial suppliers
More...
A Case Study on Computational Fluid Dynamics Analysis of Micro-MIM Products
More...
Production of fine titanium powders via the Hydride-Dehydride (HDH) process
More...
News from the metal, ceramic and carbide injection molding industries
Browse a selection of sample stories from PIM International
The majority of news stories published in PIM International are exclusive to our printed issues. Listed below is just a small selection of sample stories.
23rd Jul, 2010 New titanium powder plant to be on stream by year end
International Titanium Powder LLC (ITP) of Woodbridge, Illinois, USA, is expected to begin producing commercial quantities of low cost pure and alloyed Ti powders at its new plant in Ottawa, Illinois, later this year. The plant is expected to reach its... Click for more...
12th Jul, 2010 Adamou uses Ceramic Injection Moulding route to produce valve seat
A Ceramic Injection Moulded valve seat produced by Adamou Sàrl Adamou Sàrl of Etoy, Switzerland, is using ceramic injection moulding (CIM) to produce a sintered valve seat from 99.9% alumina powder... Click for more...
12th Jun, 2010 Successful MIM2010 conference draws an international audience
The Metal Powder Industry Federation’s MIM2010 Conference took place from 29-31 March, in Long Beach, California, USA. The three day event succeeded in attracting a diverse audience, bringing a distinctly international feel to what has traditiona... Click for more...
10th Jun, 2010 Megamet demonstrates hollow MIM components using ‘Dissolving Core Technology’
Megamet Solid Metals, Inc., Earth City, Missouri, USA, presented their development of ‘Dissolving Core Technology’ for the processing of complex hollow MIM parts at the MIM2010 Conference, Long Beach, March 29-31. The process, the company c... Click for more...
27th May, 2010 MIM2011 International Conference Injection Molding of Metals, Ceramics & Carbides: Call for Presentations published
Following the success of this year’s MIM2010 conference, the Metal Powder Industries Federation (MPIF) has issued a “Call for Presentations” for the MIM2011 International Conference Injection Molding of Metals, Ceramics & Carbides Click for more...
27th May, 2010 Metal Injection Moulding (MIM) now available at ECN
As of April 1st 2010, the metal injection moulding (MIM) activities that were formerly conducted by Philips Lighting will be carried out by Energy research Centre of the Netherlands (ECN), unit Engineering & Services. The production facilities are located Click for more...
26th May, 2010 MicroMIM Copper Diamond composite heat sink promoted at CeBIT
A copper and diamond composite ‘Super Heat Sink’ produced by micro metal injection moulding (µMIM) was promoted by a Japanese consortium at CeBIT, the world’s foremost tradeshow for the digital industry in Hannover earlier this year. Click for more...
7th May, 2010 Federal-Mogul extends its range of Powder Metallurgy materials for bushings and guides
Federal Mogul Corporation is extending its materials range for bushings and guides designed specifically for use at the very high temperatures increasingly found in turbochargers and Exhaust Gas Recirculation (EGR) components. Turbocharging is already alm Click for more...
4th May, 2010 Höganäs launches unique bicycle motor
Höganäs launches unique bicycle motor Click for more...
21st Apr, 2010 Hoganas reports strong growth, with Asia leading the way
Hoganas reports strong growth in Asia, Powder Metallurgy Click for more...
