Carbon nanotube reinforced iron-based MMCs produced by Powder Injection Moulding

News
October 5, 2015

October 5, 2015

Metal Matrix Composites (MMCs) using carbon nanotubes (CNTs) as the reinforcing material have generated significant interest in recent years through their ability to produce lightweight components combined with high stiffness and strength. Researchers at Veermata Jijabai Technological Institute in Matunga, Mumbai, India, have been investigating the use of the Powder Injection Moulding (PIM) process to produce value added MMC products with iron powder derived from grinding waste as the base metal.

On its own this type of iron powder would have inadequate properties but when CNTs are added significantly better properties can be achieved. V.J. Pillewan and co-researchers published their findings on the use of PIM to produce Fe-CNT MMCs in the International Journal of Emerging Technology and Advanced Engineering (Vol. 5, No. 5, May 2015).

They stated that carbon nanotubes were added to iron powder in fractions ranging from 1% to 6% by weight. The feedstock for the MMCs was prepared by first mixing the iron powder with stearic acid at 60°C followed by the addition of paraffin wax and CNTs with mixing at 90°C, and finally adding HDPE and mixing at 160°C. The proportions of the various materials used to produce the PIM samples are shown in the Table. Solvent debinding was preferred to thermal debinding because of more complete binder removal. Sintering was done in an inert atmosphere at 1150°C for 2 hr which was found to be sufficient to provide bonding between the iron and CNTs.

Some porosity was found in the sintered PIM samples, but the researchers state that work is underway to improve sintered density and hence to improve strength properties. As the percentage of CNTs increases in the samples it improves the hardness of the Fe-CNT composite. However, adding more CNTs may leading to fracture of these samples, and further optimisation is required. Hardness values ranged from 55 to 87 HRB. Wear tests on the PIM Fe-CNT MMCs are reported.

Carbon nanotube reinforced iron-based MMCs produced by PIM - table-a

Table 1 Mixing of proportions of Fe-CNT MMCs (From paper by V.J. Pillewan, et al. published in the International Journal of Emerging Technology and Advanced Engineering (Vol. 5, No. 5, May 2015)

 

News
October 5, 2015

In the latest issue of PIM International…

Download PDF

Extensive MIM, CIM industry and sinter-based AM industry news, plus the following exclusive deep-dive articles and reports:

  • INMATEC Technologies: Celebrating 25 years as a driving force behind Ceramic Injection Moulding
  • A year of change: Turbulence in China’s MIM industry as markets evolve
  • Ceramic Injection Moulding: The impact of variotherm and conformal cooling technology on part quality and process capability
  • The Additive Manufacturing of multi-material and multi-functional ceramic components

The latest news from the MIM, CIM and sinter-based AM industries

Don't miss any new issue of PIM International, and stay up to date with the latest industry news. Sign up to our fortnightly newsletter.

Sign up

Join our community

Discover our magazine archive…

The free-to-access PIM International magazine archive offers unparalleled insight into the world of MIM, CIM and sinter-based AM from a commercial and technological perspective through:

  • Reports on visits to leading part manufacturers and industry suppliers
  • Articles on technology and application trends
  • Information on materials developments
  • Reviews of key technical presentations from the international conference circuit
  • International industry news

All past issues are available to download as free PDFs or view in your browser.

 

Browse the archive

 

Looking for suppliers of materials, production equipment and finished MIM, CIM or sinter-based AM parts?

Discover suppliers of these and more in our advertisers’ index and buyer’s guide, available in the back of PIM International.

  • Metal powders
  • MIM, CIM & AM parts producers
  • Binders & feedstocks
  • Feedstock mixers
  • Furnaces & furnace supplies
  • Atmospheres & gas generation
  • HIP systems & services
  • Injection moulding machines
  • AM technology
  • Debinding systems
View online
Share via
Copy link
Powered by Social Snap