Metal and ceramic injection moulding: A guide for designers and end-users


This article is based on ‘Designing for Metal Injection Moulding: A Guide for  Designers and End-Users’, by Professor Randall German, published in the December 2008 issue of PIM International. Professor German is Associate Dean of Engineering at the College of Engineering, San Diego State University, USA and a Consulting Editor of PIM International.


Presented on the following pages are some effective guidelines that end-users need to consider when looking to use the Metal Injection Moulding (MIM) route for the production of components.

As this online feature clearly demonstrates, the greater the understanding of the MIM process that a designer has, the greater the chances of successful adoption of MIM technology.

Although prepared with Metal Injection Moulding in mind, the design considerations presented are also applicable to Ceramic Injection Mouling (CIM).

THE WORLD OF MIM, CIM and SINTER-BASED AM TO YOUR INBOX
Subscribe to our weekly newsletter
Sign up

Introduction

Assuming the reader has some prior knowledge about Metal Injection Moulding, this article deals with the design factors that improve production.

MIM & CIM: A guide for designers and end-users - mobile phone parts
Fig. 1 An example of a high production volume MIM success. These mobile phone parts weigh 2.3 g each

It is during the design phase that changes can be made to avoid later difficulties that might interrupt or delay production schedules.

With experience, a trained designer will envision the MIM process from the start, enabling higher process yields, lower costs, and faster processing.

Whole books have been written on the design aspects of Metal Injection Moulding [1], so here the effort is to outline some of the important principles.

More than anything, early involvement by a MIM vendor helps the most. Costs incurred during design have little impact on the final product price, but decisions made during design have major implications on the production costs. Vendor consultation before a design becomes fixed will save agony and cost during production [2].

The first questions

MIM & CIM: A guide for designers and end-users - Two MIM copper refrigerator couplings with combined external and internal features
Fig. 2 Two MIM copper refrigerator couplings with combined external and internal features

The Metal Injection Moulding process allows for complex net-shape components from a variety of compositions. Cost in Metal Injection Moulding depends on the material and several other factors, including the component mass, tooling complexity, mould cycle time, debinding and sintering times and other factors.

Because Metal Injection Moulding is similar to plastic molding, certain shapes are more attractive while other shapes prove difficult. The following page poses the some initial questions that help determine if MIM is viable.

Continue to next page: When is a part suitable for Metal or Ceramic Injection Moulding?

Download PIM International magazine

In the latest issue of PIM International…

Download PDF

Extensive MIM, CIM industry and sinter-based AM industry news, plus the following exclusive deep-dive articles and reports:

  • INMATEC Technologies: Celebrating 25 years as a driving force behind Ceramic Injection Moulding
  • A year of change: Turbulence in China’s MIM industry as markets evolve
  • Ceramic Injection Moulding: The impact of variotherm and conformal cooling technology on part quality and process capability
  • The Additive Manufacturing of multi-material and multi-functional ceramic components

The latest news from the MIM, CIM and sinter-based AM industries

Don't miss any new issue of PIM International, and stay up to date with the latest industry news. Sign up to our fortnightly newsletter.

Sign up

Join our community

Discover our magazine archive…

The free-to-access PIM International magazine archive offers unparalleled insight into the world of MIM, CIM and sinter-based AM from a commercial and technological perspective through:

  • Reports on visits to leading part manufacturers and industry suppliers
  • Articles on technology and application trends
  • Information on materials developments
  • Reviews of key technical presentations from the international conference circuit
  • International industry news

All past issues are available to download as free PDFs or view in your browser.

 

Browse the archive

 

Looking for suppliers of materials, production equipment and finished MIM, CIM or sinter-based AM parts?

Discover suppliers of these and more in our advertisers’ index and buyer’s guide, available in the back of PIM International.

  • Metal powders
  • MIM, CIM & AM parts producers
  • Binders & feedstocks
  • Feedstock mixers
  • Furnaces & furnace supplies
  • Atmospheres & gas generation
  • HIP systems & services
  • Injection moulding machines
  • AM technology
  • Debinding systems
View online
Share via
Copy link
Powered by Social Snap